Automatic Crystal Glue Dispensing Machine for Cystal Cover / Frame
Making Machine
1.any desigh: it can make any frame and album cover at any size and
of free desigh.
2.good quality:the finished product is high glossy whitout any
rubber or lines.
3.manual saving :there is no need for manual glue
adjusting,coating,no need to use the fire gun to get rid of the
bubbles,the worker can only make sure the frame in the right place
,then the product will be of no bubbles,no edge liquid flowing.
4.fast speed: the prodution ability can be 8-10sqm/h, and can be
circle production all day and night.
5. cost saving:for the complecated shaped design, the machine can
also control the gluing quality to be without any waste. also there
is no waste for the glue can and liquid left.
1.it can mix and dispending the gluing automatically . The
proportion of mixing gluing can be adjust .
2.Easy to operate, easy to make the program, it can storage 25-999
kind of graphics. automatically cleaning.automatic glue dispensing
machine on board, cardboard,glass,MDF.
Put the A glue to A barrel, and put and B glue to B barrel, it mix
the glue automatically when you press the start button .MDF board
crystal cover making and crystal frame making machine automatic
crystal glue dispensing machine.
3.According to the glue features, A barrel with mixing function
avoiding the precipitation. Also can add the heating function. And
location sensors .B barrel is with good closed to avoid
volatile.crystal wedding photo album cover making machine
4.Touch screen to operate. English interface, key parts are
imported, ensure the high speed and precision. With unique control
system, no influence of air press, ensure the dispensing evenly and
avoid the leak glue, wire drawing .
I.Machine description and working principle
Automatic glue mixing machine is mainly used for a two-component
glue( Epoxy/ Silicone/PU,etc adhesive), automatic metering and
mixing the ratio of glue. The glue are stored in two barrels
separately, according the glue weight ratio and volume demand
automatic metering by two sets of precision pump, supply to a
mixing device fully mixing, and then potting/dispensing the desired
products.
II.Main Function:
1.Automatic metering and mixing
2.Manual Gluing
3.Auto alarm for lack of material or full material
4.Gluing ratio and quantity adjustable
5.Auto cleaning
6.Glue tank Vacuum Defoaming (Optional)
7.Glue barrels,metering pump,glue pipe can be heating (Optional)
III.Specification:
Model No: | PGB-200 |
Mixing Ratio | 100:100-10:100(1:1-1:10) Adjustable |
Metering precision | ±1% |
Outflow speed | 1g/sec-15g/sec |
Mixing precision | ±1% |
Mixing mode | Dynamic mixing /Static mixing |
Glue Viscosity | Lower than 20000 CPS(mPa·s) |
Control mode | PLC + Touch Screen |
Control system | Independent R&D |
Measuring mode | Stepping motor/High-precision, wear-resistant, long-life Gear pump |
Working voltage | AC 220V 50Hz/60Hz |
Power requirement | 3.55KW |
Air pressure requirement | 4.5-8KG |
Machine Dimension | 1500(L)*1200(W)*1500(H)mm |
Weight | approx 260 KG |
Work environment | Humidity: 20%~98%RH; Temperature: 0~+40°c |
Suitable Material: For waterproof, adhesive, fixed two-component adhesive.
Such as: Crystal or less additive glue --Silicone, epoxy, polyurethane(PU),
etc.
Applications:LED products ,Crafts,Electronic components
Such as:Wall washer light, LED bar, LED strip, Ads module, Sensor,
Photovoltaic module, Photovoltaic inverter .etc
IV:Application
V, packing
