Automatic Ab Glue Dispenser for Electronic Part
Potting and encapsulation is the process of embedding products &
assemblies in a liquid resin (potting compounds) to protect them
against rough environment conditions. Potting can be performed in
atmosphere pressure or even under vacuum, if high voltage
insulation and high temperature differences are needed.
Encapsulation of parts will stop corrosion of metals and reduce
damage caused by vibration and mechanical stress.
We offer automatic ,se-mi automatic fluid dispensing potting
machine and the related production line and vacuuming systems .2 Part Silicone plyurethane epoxy potting dispensing machine AB
Resins compound dosing , dispensing ,potting system ,2K potting
technology AB glue dispensing machine Epoxy dispensing machine
Two-component dispensing machine,Dual-component dispensing machine
Meter-mix dispensing machine,Resin dispensing machine Adhesive
dispensing system,Dispensing robot with high precision Dispensing
valve, Liquid dispenser , Automated dispensing equipment
I.Machine description and working principle
Automatic glue mixing machine is mainly used for a two-component
glue( Epoxy/ Silicone/PU,etc adhesive), automatic metering and
mixing the ratio of glue. The glue are stored in two barrels
separately, according the glue weight ratio and volume demand
automatic metering by two sets of precision pump, supply to a
mixing device fully mixing, and then potting/dispensing the desired
products.
II.Main Function:
1.Automatic metering and mixing
2.Manual Gluing
3.Auto alarm for lack of material or full material
4.Gluing ratio and quantity adjustable
5.Auto cleaning
6.Glue tank Vacuum Defoaming (Optional)
7.Glue barrels,metering pump,glue pipe can be heating (Optional)
Adjustable Ratio | 1 :1 ---10:1 adjustable |
Output Speed | 0.5g/s -12g per single pump |
Mixing accuracy | +/- 2% |
Program memory | 10pcs |
Viscosity | 50cps~35000cps |
Operation mode | manual / automatic/ Third party signal |
Ratio control | PLC/double cylinder plunger pump |
Flow control | Digital input |
Program mode | Tech program |
Automatic control system | Touch screen and trigger |
Mixed mode | Dynamic mixing (with self-cleaning function) |
Tank | Stainless tank A(25L)and stainless tank B(10L) |
Liquid level sensor (low liquid level /high liquid level and limit
liquid level) |
Tank stir |
Constant heat (temperature to 80°C) |
Y type Filter |
Voltage | 220V/50Hz/3500W |
Input air pressure | 0.4MPa-0.7MPa |
Dimension | 1200mm×600mm X1500mm |
Machine frame | SPCC+Industrial aluminium +stainless +metal plate |
Others | AB tank ,A pump,AB pipeline heating function |
PLC Operation Controlling System
Robot two part ab part glue epoxy resin system silicone
polyurethane resin dispenser automatic machine price robot
1 Dispensing volume is controlled by the speed of pump's motors ;
Glue speed adjustable within the speed range .2 Machine with detecting function that detect the speed and running
time of pumps to ensure the ratio reliability.
3 Adjustable gluing-out volume make sure glue A/B dispense out at
the same time from glue valve to get better glue mixing effect .
4 Machine with gel resistance calculator , which prevent the
mixture curing inside .
5 You can set single gluing-out and steady gluing-out function to
meet up with your different process requirement .
6 Whole machine system and function is controlled by Panasonic PLC
and MGCS touch screen .
7 Reserved PLC communication interface, which easy connecting with
outside device .
8 Equipped with a safety lock to prevent staff from wrong operation
.
Suitable Material: For waterproof, adhesive, fixed two-component adhesive.
Such as: Crystal or less additive glue --Silicone, epoxy, polyurethane(PU),
etc.
Applications:LED products ,Crafts,Electronic components
Such as:Wall washer light, LED bar, LED strip, Ads module, Sensor,
Photovoltaic module, Photovoltaic inverter .etc
IV:Application
V, packing
